Tutorial (english, see below)
Diese Seite bezieht sich auf das Tutorial auf youtube, das das Bauen und Programmieren eines Roboters zeigt, mit dem du am RoboCup Junior Rescue (Maze oder Line) teilnehmen kannst:
Teil 1: https://youtu.be/SVTgO8qPiBA
Teil 2: https://youtu.be/E_XjcJNFKKg
Teil 3: https://youtu.be/skUOjn7cGkg
Teil 4: https://youtu.be/jG0ZYiqamvY
Folgende Dateien brauchst du:
Motherboard Motortreiber Exercises List of components Pins_1517_9_Board 3D Druck
Ausserdem die IDE und den Compiler von Microchip:
https://www.microchip.com/mplab/mplab-x-ide
Runterladen, windows oder linux oder mac, Installer ausführen.
Am Ende wirst du gefragt, ob du diverse Dinge zusätzlich brauchst, kannste alles abwählen
Dann lädst du dir den Compiler runter, auch installieren.
https://www.microchip.com/mplab/compilers (xc8!)
Gehts nicht? Es gibt 937 Tutorials auf youtube dazu.
Wenn du noch kein „C“ kannst, dann kannst du es z.B. hiermit lernen:
Für Anregungen kannst du mir eine Mail schicken: robocup@uni-kassel.de
This page refers to the tutorial on youtube that shows how to build and program a robot to participate in the RoboCup Junior Rescue (Maze or Line).
Part 1: https://youtu.be/SVTgO8qPiBA
Part 2: https://youtu.be/E_XjcJNFKKg
Part 3: https://youtu.be/skUOjn7cGkg
Part 4: https://youtu.be/jG0ZYiqamvY
Here are the texts for to translate in your language:
Part 1: Text for translation, building
Part 2: Text for translation, programming 2.1
Part 3: Text for translation, programming 2.2
Part 4: Text for translation, programming 2.3
You need the following files:
Motherboard Motortreiber List of components Exercises Pins_1517_9_Board 3D Druck
Also the IDE from Microchip
https://www.microchip.com/mplab/mplab-x-ide
Download, windows or linux or mac, run installer. At the end you will be asked if you need various things in addition, you can deselect everything. Then download the compiler, even install.
https://www.microchip.com/mplab/compilers (xc8!)
It doesn´t work? There are 937 tutorials on youtube about this.
If you don´t use the programming language “C”, then you can do it e.g. learn hereby:
code blocks how to
For suggestions you can send me an email: robocup@uni-kassel.de